Don't have what you're looking for? We now offer custom made diffusers! These diffusers are made to your specifications based on the available options listed. Custom diffusers are built-to-order and will take up anywhere between 2-8 weeks to manufacture before shipping.
Your diffuser's finish will be either raw aluminum, or powder coated black:
- Raw 5052 Aluminum - CNC Designed & Cut, this product will have surface scratches
- Semi-Gloss Black 5052 Aluminum - CNC Designed & Cut, Powder Coated Black
Below describes the measurements we need for your diffuser. Please scroll through all pictures.
Width (inches): The overall width of your diffuser. It is measured from left-to-right.
- Length/Depth (inches): The overall length/depth of your diffuser. It is measured from the front-to-back.
- Flat (inches): This is the flat portion of your diffuser before angling it upward. The flat toward the front of the diffuser/car.
Angle (degrees): The angle is the amount of degrees to bend the diffuser upward. Diffusers are most likely to work at an angle of 5-9 degrees.
- Number of Fins (numerical value): How many fins would you like your diffuser to have? We typically recommend a total of 5-6 fins. Fins will be equally spaced apart unless otherwise told.
Fin Height (inches): This is the height of your fins top-to-bottom. This is the overall height of the fins at the back end of your diffuser.
-----> IF ANY MEASUREMENTS DON'T SEEM RIGHT BASED ON WHAT YOU CHOSE, WE WILL CONTACT YOU.
- Shipping on all custom diffusers is free to the lower 48 Contiguous US.
- The fins on your diffuser will be riveted on.
- All fins will be equally spaced apart unless otherwise told. Customer supplied pictures show fin spacing designated by the customer.
- There will be two discreet holes in the back end of the diffuser to hang it for powder coating.