Fits non-TRD Pro/Trailhunter trims.
Our 2024-Current Toyota Tacoma Fender Flare Kit adds 1 inch per corner on TRD PreRunner/Sport/Off-road and Limited trims, and 1.5 inches on SR and SR5 trims. It is designed to provide extra protection to your vehicle’s body panels from the dirt and rocks picked up by wider and taller off-road tires.
The Fender Flare Kit features an OEM+ style design, with the front flares featuring a high clearance design and aero stabilizing fins.
The kit is available in high-quality automotive grade fiber-reinforced plastic in black primer (matte) which can be painted over or can be used as is. It is also available in high-quality carbon fiber with either a gloss or a matte top coat finish.
The Fender Flare Kit does not require any drilling or trimming of the OEM parts on the car.
The Fender Flares are held on by 3M™ Super Strength Molding Tape, as well as the OEM bolts in the wheel wells. It is a simple installation, without the need to modify any OEM body panels, other than the removal of the OEM fender flares if equipped.
In order to install on SR and SR5 models, you will need to purchase 14 of the OEM 10mm wheel opening molding screw for the rear flares (Toyota Part Number 90159-A0053).
The vehicle’s surface needs to be thoroughly cleaned with alcohol before the installation to ensure a proper bond with the 3M™ tape.
We recommend applying adhesion promoter on the back side of the flares before installing the 3M™ tape to help with better adhesion. Apply double layers of the 3M™ tape for the best result. Optimal surface temperature for the 3M™ Super Strength Molding Tape is above 65°F (18°C).
Aero That Makes a Statement
Stand out with the what we feel are the highest quality aerodynamic parts on the market.
Renowned & Reputable
Be unstoppable & showcase your car with above industry standard pieces.
Visually Stunning
Both photo worthy & track ready, our aero gives that feel-good feeling.