















Porsche 971 Panamera Turbo / GTS Valvetronic Exhaust System
At the core of this system is aΒ true performance-driven architecture designed specifically around the airflow demands and firing order of Porscheβs 4.0L V8. From the inlet to the rear section, the exhaust uses a carefully optimized layout that minimizes turbulence and pressure buildup while maintaining exhaust gas velocity. The internal flow path is engineered to enhance scavenging and balance pressure waves between banks, resulting in a sharper throttle response and a smoother, more linear power delivery across the rev range.
The system incorporates an active valved rear section, allowing the exhaust to operate in two distinct personalities. With the valves closed, exhaust gases are routed through a tuned internal path that suppresses drone and unwanted resonance, keeping the cabin refined during highway cruising and daily use. Open the valves, and the flow transitions to a more direct, straight-through pathβunlocking maximum volume, aggressive overrun character, and a high-energy, exotic V8 tone that builds cleanly with RPM rather than breaking into harshness.
Every component is hand-built and TIG-welded, using casted transitions and collectors where necessary to ensure smooth internal geometry and consistent wall thickness. The system is designed using underbody scan data to maintain perfect clearance, OEM-style mounting points, and a true bolt-on installation with no cutting or welding required. Whether paired with a stock vehicle or a tuned setup, this exhaust provides the airflow headroom and acoustic control demanded by high-output Panamera builds.
Performance Gains
When installed on an otherwise stock Porsche 971 Panamera Turbo or GTS, owners can expect measurable performance improvements due to reduced backpressure and improved exhaust flow efficiency:
-
Horsepower Gain:
+22β30 HP at higher RPM -
Torque Gain:
+20β28 lb-ft, particularly noticeable in mid-range acceleration -
Throttle Response:
Sharper turbo response and improved transient boost recovery
With ECU tuning, these gains can increase further, as the engine is able to fully take advantage of the reduced exhaust restriction and improved thermal efficiency.
Key Specifications
Configuration
-
Performance cat-back exhaust system
-
Optimized internal flow architecture for 4.0L twin-turbo V8
-
Active valved rear section with dual flow paths
Valve Control
-
Factory drive-mode valve integration supported
-
Included remote valve control module for independent on-demand operation
-
Seamless switching between quiet and aggressive modes
Materials & Construction
-
Available in AISI 304 Stainless Steel or 4AL-6V (Grade 5) Titanium
-
Fully TIG-welded, hand-finished construction
-
Casted collectors and transitions for optimal internal airflow
-
Heat-resistant design for sustained high-load driving
Tips
-
Quad-tip configuration
-
Optional finishes available (depending on build spec)
Installation
-
100% bolt-on installation
-
Uses OEM mounting points
-
No cutting, welding, or permanent modification required
Vehicle Fitment
-
Porsche Panamera Turbo (971) β 2017+
-
Porsche Panamera Turbo Sport Turismo (971) β 2017+
-
Porsche Panamera GTS (971) β 2019+
-
Porsche Panamera GTS Sport Turismo (971) β 2019+
-
Engine: 4.0L Twin-Turbo V8
Why This Exhaust Is Different β Three Unique Points
1. Factory Integration + Remote Freedom
Unlike systems that force you to choose one or the other, this exhaust supports both OEM drive-mode valve control and an included remote valve system, giving you total authority over sound behavior at any time.
2. Engineered, Not Just Loud
The internal layout is designed to control pressure waves and flow, delivering a clean, exotic V8 tone without rasp or droneβespecially critical for a long-wheelbase performance sedan like the Panamera.
3. Premium Materials, No Compromises
Choose between AISI 304 stainless steel for durability or 4AL-6V titanium for maximum weight reduction and sharper acoustics, with every unit hand-built and casted where it matters most.
Aero That Makes a Statement
Stand out with the what we feel are the highest quality aerodynamic parts on the market.
Renowned & Reputable
Be unstoppable & showcase your car with above industry standard pieces.
Visually Stunning
Both photo worthy & track ready, our aero gives that feel-good feeling.